The Rebel 102 Servo SE is a compact bar loading system for CNC lathes. With a large magazine capacity the Rebel provides long unattended operation. The Rebel combines the advantages of auto bar loading with a small footprint and a small price. The Rebel can process bars in the diameter range of 8mm - 102mm and in lengths up to 1520mm (5’) on machine tools.

Free Of Noise And Vibration
While processing the bar there is no contact between the material bar and the loading magazine, so whether the bar is round, square, or hexagonal, processing is possible with an optimal spindle reduction without any problems.

Programmable Bar Diameter
Bar Center height, feed torque, & bar diameter job perameters are set and stored in the 36 part program memory for easy retrieval; allowing for bar changeover in a matter of seconds.

Electric Operation
All electric operation, no shop air required.

Minimum Space Requirement
The compact design of the Rebel 102 SE loading magazine results in the minimum amount of floor space being used.

Side Loading
The storage capacity is 760 mm (30”) deep. The inclination of the storage table can be adjusted to give the loader a “soft-load” effect.

Feed Force
Feed Force automatically set by the controller after the bar diameter is entered into the user-friendly touch screen control.

Spindle Liner Access
Spindle liners sized to bar stock diameter support the rotating bar allowing maximum RPM.

Rebel 102 Servo SE Short Loader Specs