The FMB Turbo 5-55 is an automatic Bar Loading Magazine Feeders for processing bars in the diameter ranges of 5-55 mm in lengths from 10’ to 14’ on CNC lathes. Quick change polyurethane guide channels allow for quiet operation at high RPM while feeding round, square or hex bar stock. The Turbo 5-55 is compatible with all kinds of fixed headstock lathes. Swiss type synchronization device is also available.

  • The FMB Turbo 5-55 is designed for automatically feeding round, square or hexagonal bar stock into CNC lathes

  • Oil filled polyurethane guide channels provide the ideal guiding system while reducing noise and vibration to a minimum

  • The polyurethane guide channels can be changed quickly and easily for feeding other diameters of bar stock

  • Damage to the bar stock is avoided since there is no metal to metal contact

  • Sturdy base structure due to the use of gray cast iron for the machine bed

  • The magazine storage capacity is 11 inches. Optional extensions and bundle loaders are available to handle capacities up to 2.5 tons

  • Bar diameters within a 20 mm range can be accommodated within one guide channel size. The 20 mm range is increased significantly when straight bars are used. (.007”/ft. TIR max)

  • The bar remnant is withdrawn to the back end of the magazine. A gripper then extracts it out from the bar stock collet

Technical Specifications